Can you connect an external horn to a Chexit device?

Chexit devices shipped after 8-24-2015 with motor driven:
  • Use the Alarm Relay Contacts on Field Wiring Cable, blue and brown wires of the Chexit device.
  • Connect the blue wire to +24VDC (red wire on Field Wiring Cable) and connect the brown wire to positive side of the horn and negative side of the horn to ground (black wire on Field Wiring Cable)
Chexit devices shipped prior to 8-24-2015 with solenoid driven:
  • Use the external alarm contact, blue and brown wire on Chexit device.
  • Connect the blue wire to the red wire and connect the brown wire to positive side of the horn and negative side of the horn to ground (black wire).

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask