The RX switch is required to activate the ALK. The RX switch monitors the pushbar and will signal the ALK to go into alarm when the pushbar is depressed. The RX switch also allows free in...
There is currently an Exit Alarm Kit for the 19 device. It is ordered by description:
19 EAK 3' x Finish
19 HWEAK 3' x Finish (Hardwired version)
19 EAK 4' x Finish
19 HWEAK 4'' x F...
The ALK exit alarm will sound when the exterior trim is used to enter from pull side without using access control when an LX latch bolt monitor switch is used instead of RX push bar monitor switch.
Followings are the reason for 98/99 exit alarm ALK not sound when push bar is activated.
Make sure key switch on exit alarm ALK is turned on, wait for 20 seconds before you activating the pushba...
L283-263 and L283-239 are obsolete part numbers that were used to specify "request to exit" on the L9000 and LV9000 locks. To specify RX on L9000 locks after January 2, 2017, specify the lette...