chexit circuit board

RELATED FAQS

Question
Answer
Part number for Von Duprin standard 15 sec. release Chexit module shipped after 8-24-2015 with motor driven is 040086-00. Part number for Von Duprin standard 15 sec. release Chexit module shi...
The circuit board is sometimes referred to as a "module" in the field.
The Main Printed Circuit Board used with all AD-Series products has been updated with three major changes: - A more robust Tamper Switch and MUCH improved Tamper Switch lever arm and the location ...
CO-100 now allows the PIN code length to be changed manually.  Each CO100 has a label that indicates its firmware revision.  Firmware revision 2.5.0 or higher support these...
CO-100 PIN length can range from 3 digits to 6 digits with firmware version 2.5.0 and higher.
Procedure to change PIN length: 1. Press {programming code (default is 97531)} then {*}.2. Press {99} then {*}, to enter Special Function Length Menu.3. Press {4} then {*}, to enter Pin Length M...
CO-100 now has NEW lock status reporting capabilities. Battery status, firmware version, hardware version and PCB serial number. See instructions below for these status menus.
See PCB replacement instructions below. The horn is part of the board and can only be replaced by replacing the entire board.