faculty restroom emergency key

RELATED FAQS

Question
Answer
Standard and Full Size I/C mortise cylinders on the L9485 and L9486, Hotel or Restroom Locks, use the concept of a ward ring to lock out all change keys once the deadbolt is thrown. Instead of a fu...
HANDINGA stop ring is installed on the right side for right hand operation and on the left side for left hand operation.  Right hand shown below.
L9485:  Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn.  When deadbolt is thrown, all keys become ino...
Faculty restroom lock with deadbolt - Latchbolt is operated by key outside or by knob/lever inside. Outside knob/lever is always fixed. Deadbolt is thrown or retracted by inside thumbturn. When dea...
Faculty Restroom Lock - Outside Lever is fixed. Entrance by key only. - Inside Push-button activates occupancy indicator, allowing only emergency master key to operate. Turning lever or closing doo...
Faculty Restroom Lock - With indicator cylinder. Outside lever fixed. Entrance by key only. Push-button in inside lever activates visual occupancy indicator, allowing only emergency masterkey to o...
Faculty Restroom Lock - With indicator cylinder. Outside knob fixed. Entrance by key only. Push-button in inside knob activates visual occupancy indicator, allowing only emergency masterkey to oper...
ND85PD (ANSI F93) Faculty Restroom Lock  Outside lever fixed. Entrance by key only. Push-button in inside lever activates visual “occupancy” indicator, allowing only emergency master key to ...
Faculty Restroom Lock - With indicator cylinder. Outside knob fixed. Entrance by key only. Push-button in inside knob activates visual occupancy indicator, allowing only emergency master key to op...
L9040 locks WITHOUT indicator uses an emergency tool available in the price book, L583-233.L9040 locks WITH an indicator requires a small flat blade screwdriver.
The L583-233 emergency key spindle length is 1.575"The L583-233 emergency key will operate on a door thickness up to 3" extended equally. 
A flat head screwdriver can be used or the 35-250 emergency key.
The emergency keys are shipped with each lock.  The part numbers are; 61-509 standard and 61-510 large bow size.
Part numbers listed below:
The part number is 48-102 C, you will need to specify the cuts.
M504-271 is the emergency key used to open a locked S40.