Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ flush transom latch ”

RELATED FAQS

Question
Answer
Can you mount a 4040XP CUSH with a Flush Transom frame?
The 4040 XP CUSH/EDA can be mounted on a Flush Transom frame by using a -419 Flush Panel adapter.
How do you install a 4110 with flush transom frame?
The 4110 series closer is installed on a flush transom frame using the -419 flush panel adapter.
FLUSH TRANSOM SHOE
PA Installation, PA Mount, Flush Transom
What strike do I use with a Von Duprin rim device on a pair of doors with flush bolts?
NON Fire Rated doors would use the 1609 strike applied to the inactive leaf with flushbolts.  This may NOT be used on Fire Rated openings.
Does Ives offer a 296G Flush Bolt?
The 296G is is not a model number but rather the UL listing number.
Are flush bolts available on the inactive leaf of hurricane double doors with either FBC or NOA approvals?
Ives SB360 surface bolt at top and bottom are the only flush bolts approved for use on H-Series hurricane FBC or NOA applications? The only approved latching hardware for inactive leaf of pairs w...
When using a 9927 and you have a flush transom above is there a bracket to mount the latches to?
When using 98/9927 with flush transom above: You will need to use a 260U strike for flush transom applications OR a 260U-F strike for 98/9927-F fire rated device.
What is the standard undersize for Steelcraft transom panels?
Steel transom panels are available: 1 3/4" thick panels - supplied in L-Series (L20, L18 or L16-Series) laminated construction. Recommended down sizing is as follows: Without Transom Bar 3...