lock for thick door

RELATED FAQS

Question
Answer
Specify how the door is extended and the door thickness.  Pricebook availability: D knobs ordered for Extended Equally (EE) and Extended Differently (ED) doors over 2" up to 2 1/2"...
If the lock has not been ordered then specify a door thickness of 1 3/8" and a shim kit will be provided to allow installation on a thin door. If the lock has already been ordered then order the A...
The L9000 lock can be ordered for doors greater than 1 3/4" thick.  The allowable door thickness is dependent on the L lock function and how the lock is extended.  All locks for exte...
The minimum door thickness that the AD or CO series lock will mount on is 1 3/8".  Be advised that this will require additional spacers to be ordered separately to allow the lock to mount...
The AL series lock fits up to 1 7/8” door thickness out of box.
The easiest method to obtain an AL lock for a 2" door is to specify a 2" thick door when ordering.  
Part required by function:2 each A700-043 driver & A700-034** lever insert in addition to the chassis parts below:AL10S – 2 hubs A700-028AL25D – 2 hubs 1 A700-028 (inside), 1 A700-030 (outside)...
Most locks will have a standard door range they will install on, but occasionally customers will want to use them on thicker doors.  In order to do so, the extended door thickne...
The Falcon MA will not fit a 1-3/8" thick door.