mounting height for pull handle

RELATED FAQS

Question
Answer
Back to back glass mounting is available on the 8103/8103EZ/8190 pull.  The glass version has a shorter screw and also either felt or rubber bumper.
According to ANSI specifications for cylindrical or mortise locks: The lock strike centerline should be 40 5/16" from the bottom of the frame with the lock in relation to the strike. &...
The ANSI 156.19 standard states (in appendix A-5 Knowing Act Switches) that wall actuators are to have an installation height of a minimum of 34" and a maximum of 48" (center of the switch) of...