Schlage power supply warranty

RELATED FAQS

Question
Answer
The warranty on the PS900 Schlage Electronics Power Supplies is 12 months from date of manufacture. The warranty is only valid for a true manufacturing defect in the power supply. Any customer dama...
Von Duprin warrants that the product manufactured by it and delivered here under will be free of defects in material and workmanship for a period as follows: Exit devices and trim for 36 months...
Finish is not specifically stated as being covered under warranty as it is covered under defects in material and workmanship.  EXCEPTION: There is no finish warranty for Falcon products. ...
Falcon lock warranty statementIves warranty statementGlynn-Johnson warranty statementLCN closer warranty statementSchlage warranty statementSteelcraft warranty statementVon Duprin warranty statement
Please contact the Allegion Product Support Team on all questions or inquiries pertaining to hardware finishes warranties. Please send an e-mail to the applicable Product Support team:Closers_TechP...
Warranty Statement3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below The provisions of these limited warranties do not apply to P...
Schlage Residential Warranty.
The battery for the HHD (Bluebird Pidion) is covered under warranty.   As the batteries do not come separate, the entire unit must be replaced.
Warranty on the HHD is one (1) year from date of purchase.
If unit is out of warranty, battery can be purchased here.
If other HHD accessories are needed, please see 76747 for links.
Warranty on the HHD is one (1) year from date of purchase.  The battery for the HHD (Bluebird Pidion) is covered under warranty.   However, as the batteries are not available s...
The Von Duprin and Schlage PS900 series power supplies do not meet this requirement.
Product Ordered after 7/10/2012 - Product identified by label on QEL motor You no longer need to use the 900-2Q option board (no longer available) with the PS900 power supplies to ...
Product Ordered before 7/10/2012 - Product identified by no label on QEL motor. You must use the 900-2Q option board with the PS900 power supplies to operate the QEL devices.  The attached ta...
The 900-2Q board is no longer available. For warranty purposes, QEL conversion kit and 900-2RS board are required. The 900-2RS replaces the 900-2Q board.
The installation instruction for PS900 series power supplies are available online under the Von Duprin, Falcon exits, Schlage, and Schlage Electronics sections of the website.  You can also find by...
Reference The 914 Installation instructions.