EDA ARM - The EDA arm is a heavy duty parallel arm mount. The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...
The 4110-18, and 4110-18 CUSH drop plates are identical. The difference between a 4110 EDA, and a 4110 CUSH is the templating on the door. That is why you order them differently, to...
The 1460 Regular Arm part numbers are:
Regular Arm -- 1460-3077 or 1460-3077L for long arm (must specify finish).
Regular Arm with PA -- 1460-3077PA (must specify finish).
Regular Hold Open Ar...
A 4110 with AVB (advance variable back check) would be recommended. Using a SCUSH (Spring Cush) arm will also help minimize shock to all door hardware.
The 4040/4040XP closer mountings have the following maximum opening degree templating:
The 4040/4040XP PA "Regular Arm" mount will allow for 180° max. opening.
The 4040/4040...
For LCN Cast Iron Closers it is (1 3/4") wide, (1 1/2") tall and (1 1/2") deepFor LCN Alum body Closers it is (2") wide, (1 1/2") tall and (1 1/2") deepSee HERE The
center to center hole ...
When using the 4111 with a bar style coordinator
MB-mounting brackets ordered from IVES are required.
The brackets wrap around the coordinator to provide a surface for mounting the parallel arm ...
Cam Lift hinges can only be used with LCN door closers that have a "Regular" style arm. Manual Closers: Maximum lift dimension is 3/4". Can not be use EDA, CUSH, or Track Arm do...