Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ vertical tail piece ”

RELATED FAQS

Question
Answer
What is the part number for the SFIC tail piece for a W lock?
Q330-168 SFIC Tailpiece (throw member for levers) Q330-169 SFIC Tailpiece (throw member for knobs) 
Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?
 The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal.
What is the part number for T lock tailpiece used with a conventional cylinder?
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders.  Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
Why will 912L not retract the latch bolt all the way?
If the 912L was shipped after February 28,  2011, Check the installation instructions, step 3 to be sure all parts are installed on the trim correctly, even if the trim was received in th...
Will the Schlage CO or AD trim work with the Falcon 25V device?
The Schlage AD/CO trims are not compatible with the Falcon 25-V device due to the main cam on the device rotating the opposite direction for a given hand compared to the AD/CO trims output dri...
Reinstalling an AD-993 Tailpiece Holder Assembly
Below is the link to the document that shows how to install the AD993 tail piece assembly: Reinstalling an AD-993 Tailpiece Holder Assembly
Why does my AD or CO series lock unlock when the lever is raised?
Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted.    This will occur if the outside spindle (square post) is install...
Are 1 piece top rods available for a 24V or 25V device?
As of August 3rd, 2011 this is no longer an option.
White plastic sleeve for Orbit knob
The spacer (A508-640) is required to hold the cylinder in place due to the large size of the Orbit knob.
What astragals are available?
Types of astragal offered from Steelcraft are as follows: "Z" Astragal - For information on "Z" astragal types and attachment refer to the TD Manual page 3.3.17. Most commonly used on double ...