Please contact the Allegion Product Support Team on all questions or inquiries pertaining to hardware finishes warranties. Please send an e-mail to the applicable Product Support team:Closers_TechP...
Warranty Statement3 Year Limited Mechanical Warranty and
1-Year Limited Electromechanical Warranty - Additional warranties listed below
The provisions of these limited warranties do not apply
to P...
Finish is not specifically stated as being covered under warranty as it is covered under defects in material and workmanship. EXCEPTION: There is no finish warranty for Falcon products. ...
BAA/ARRA stand for Buy American Act and American Recovery and Reinvestment Act.
A brief description of some of the federal requirements can be found in the BAA Catalog on the Allegion...
Country of Origin (COO) information can be found in the Buy American Act (BAA) brochure.
To obtain product certification forms:Download the BAA Catalog on the Allegion website Complete the information requested in the the BAA Catalog with a detailed copy of the prod...
To convert a Schlage mortise L9080 function to a L9070 function purchase and replace the following:
L283-133, L9070 lock case
L283-040, spring cage (for outside lever)
The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1.
Spindles and Springs
Part Number
Description
L283-060
Spindle and spring, 1...
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for ...
ALL AD and CO products are warranted for electrical for 1.0 year after installation OR 2.0 years after manufacture.
The mfg date is on the lock stickers AND can be viewed electronically with th...
The 900-2Q board is no longer available.
For warranty purposes, QEL conversion kit and 900-2RS board are required. The 900-2RS replaces the 900-2Q board.
Special Rust Inhibitor (SRI) - is a pretreatment that is applied to the metal components prior to the addition of the LCN powder coat finish, standard or custom. ...
Minimum dimensions to cutouts for glass lights:
Vertical edge of door to edge of cutout = 5 29/32"
Top of door to top of cutout = 6"
Bottom of door to bottom of cutout = 10"
Reinforcing chann...
Von Duprin warrants that the product manufactured by it and delivered here under will be free of defects in material and workmanship for a period as follows:
Exit devices and trim for 36 months...
The date stamp on a 4041/4040XP is on the packing nut. The date will be the week of the year and then the year.
EXAMPLE: 10 05 would be week 10 of 2005. For example see...