Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what cylinders are not modular? ”

RELATED FAQS

Question
Answer
Which cylinders were not affected by the modular design change?
The following list of cylinders were not affected by the change to modular cylinder:    09-900, 09-904, 09-905, 09-907 mortise cylinder turnsSmall format interchangeab...
Can you order the old non-modular mortise cylinder?
We have completed our transition to the modular design and no longer have the old design.
Can the modular cams be used on the older cylinders?
The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.
What cam do Schlage mortise locks use?
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for ...
Do we offer a parts pack for modular mortise or rim cylinder?
See descriptions for the 09-992 thru 09-997 parts kits for modular mortise cylinders.  The 09-998 is a kit for a rim cylinder.      
How do I change my modular cylinder length?
A modular cylinder's length is determined by 4 basic parts; a cam screw, cam, plug extension, and a back housing.  Most of these parts are used in more than one cylinder length and...
When did the modular cylinder launch?
Modular cylinder was launched July 26, 2010 and replaced the standard key-in-lever, mortise, and rim cylinders.     For a list of cylinders not affected by the modular cylinder design change cli...
What is the part number for the dogged cam used in modular cylinders?
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mouting holes that allow for the cams to be mounted inverted...
Cam screw loosening and falling off on modular cylinders.
There have been a few reported cases of the torx cam screw loosening on modular designs shipped prior to April 16th 2013.   History of cam screw changes: Standard screw shipped July 27t...