Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is spring cush ”

RELATED FAQS

Question
Answer
What is the part number for the Spring Cush block?
The part number for the Spring Cush block assembly is: model number-3080. EXAMPLE: 4110-3080
What are the 1460 closer arm options?
The 1460 Regular Arm part numbers are: Regular Arm -- 1460-3077 or 1460-3077L for long arm (must specify finish). Regular Arm with PA -- 1460-3077PA (must specify finish). Regular Hold Open Ar...
How do you order a 4110 hold open spring cush arm only?
The 4110 hold open spring Cush (Spring H Cush) arm part number is 4110-3049SCNS.
SPRING HOLD-OPEN CUSH ARM
SHCUSH,
SPRING CUSH ARM
SCUSH,
Which closer should I use for a "High Wind" condition?
A 4110 with AVB (advance variable back check) would be recommended. Using a SCUSH (Spring Cush) arm will also help minimize shock to all door hardware.
How do I set the hold open on my 4040 closer?
The hold open position on a "REG" or "EDA"  hold open arm is set with the door to a few degrees shy of the desired hold open point. To properly set, open the door 5° less then the desired hold open...
What is the difference between an LCN CUSH arm, and an LCN EDA arm?
EDA ARM - The EDA arm is a heavy duty parallel arm mount.  The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...
How do you mount an LCN door closer on an arched or radius door?