what parts are extended for an ND lock extended outside

RELATED FAQS

Question
Answer
ND-series locks manufactured on or after January 30, 2017 will ship with an improved spring cage and matching lever design. The design features are noted below. Because of this change, there a...
NOTE: ND locks manufactured on or after January 30, 2017 will no longer make use of the soft durometer spacer. The improved spring cage and matching lever eliminates the need for this spacer.Schlag...
The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.
On ND locks manufactured on or after January 30, 2017 only the SFIC lever and SFIC driver are needed to convert the lock from Full Size conventional (PD) or Full Size IC (JD, RD, TD) prep to S...
On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...
The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4". The latch supplied is the 13-047 deadlatch and 13-048 springlatch.
The ND electrified motor driven locks shipping as of  March 14, 2016 has a field selectable operating mode, you can convert from EL to EU or EU to EL by flipping a switch on the chas...
The electrified ND electrified solenoid driven lock shipped prior to March 14, 2016 can be converted between fail safe (EL) and fail secure (EU) by swapping out the solenoid, sleeve,...
On ND-series locks manufactured on or after January 30, 2017, the following parts are needed to convert the lock from JD to LD:03-231 - Open Cylinder lever (specify design and finish)N523-022 - Tai...
The ND-Series FSIC driver is part number N523-127.
It is not possible to mount a cylindrical lock less trim one side, however you can order the lock less components (like lever or rose).  If the customer is looking to mount the lever less trim, t...
Up to 8' replace the top rod with part # 4270100018. 
From 8' to 9' use the part # 4270100172 extension rod kit
From 9' to 10' use part # 4270100197 extension rod kit. 
ND -series locks manufactured on or after January 30, 2017 use the following spring cages:Outside - N523-218 - For ALL cylinder options except for JD-YA6, JD-YA7 and JD-MEDInside - N523-222 -...
ND-series locks manufactured before January 30, 2017 used the following spring cages:
The old D series lever lock was replaced by the ND lock in September 2003.
Medeco does offer a key-in-lever cylinder to fit the Schlage ND.You will need to contact Medeco for the cylinderSpecify a key-in-lever cylinder to fit the Schlage ND lock.They will supply a cylinde...
The L283-150 is a modified mounting plate to allow a user to only install trim on the inside of the L9000.  For installation and door prep requirements, see the install sheet.  Add...
On ND-series locks manufactured on or after January 30, 2017:The ND FSIC lever part number is 03-232.  You will need to specify the design and finish.
On ND Series locks manufactuered prior to January 30, 2017:The ND FSIC lever part number was 03-032.  
Schlage does not have a stainless steel/non-ferrous lock series. The only option that Allegion provides is the Grade 1 cylindrical Falcon X-Series. To order the Falcon X with the stainless st...
ND locks shipping on or after January 30, 2017 will look very similar when assembled to their predecessor that shipped prior to that date. There are several ways to distinguish the old versus the n...
Outside Knob/Lever and Rose/Escutcheon Assemblies      Part Number  Description    A Rose with Knob/Lever  09-506  Designs: 01 02 03 05 06 07 12 17 18 OME 41 42     09-655  Des...
For ND locks shipping on or after January 30, 2017, the lever and core driver will need to be changed to convert from JD to BD.SFIC lever, 03-200SFIC driver and spacer, 09-774
For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed.  Depending on the function the components below are required.Outside spring c...
The 6211 would be the most common electric strike to be used with cylindrical locks on a single door application.  Check the template to confirm compatibility with specific cylindrical lock model n...
The standard out-of-the-box ND lock will fit the following door ranges: All functions except ND85 will fit onto a door 1 5/8" through 2 1/8" extended equally. The ND85 will fit on doors fro...
ND locks can be extended up to 6" Extended Outside.  
The blank outside rose part number is 09-508.  This part is identical to the standard rose where a plug is installed inside the rose so a small seam is visible.  Mounting posts ...
For modular designs: All functions except ND85 the tailpiece part number is N523-022. The ND85 tailpiece part number is N523-123. For non-modular designs: All functions except ND85 the t...
ND-Series Cylinder Reference Table Function Door Thickness Cylinder Mechanism Complete Cylinder Non-Hotel Functions Standard Conventional 23-065 Primus 20-765 Pri...
Select the appropriate installation instructions below for step-by-step guidance on how to install a Schlage ND lock.  ND-Series Installation InstructionsND25 Installation InstructionsND170 Insta...
Only the chassis components are modified for thicker door applications, the lever and spindle assemblies remain intact.  The following parts may be modified depending on the function of the lock ...
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer
On August 15, 2012 Schlage began shipping ND-Series locks with a hassle free clip to aid with the installation of the anti-rotation plate.  This feature has been added to the hub to keep the anti-r...
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock will need to ...
The new motor driven ND electrified locks shipped after March 14, 2016 do not require a solenoid. The Schlage ND-Series electrified locks shipped prior to March 14, 2016 would have used a...
The ND lock is available with an RX option:When ordering a complete ND lock specify RX when the request to exit (RX) switch is required.The ND80EL, ND80EU, ND96EL, ND96EU, ND12EL, ND12EU electrifie...
The ND lead lined option is specified by XN12-307 and consists of two 1/16” thick rose plates, a single 1/8” button/cylinder plate and a 1/16” latch sleeve.
Most locks will have a standard door range they will install on, but occasionally customers will want to use them on thicker doors.  In order to do so, the extended door thickne...
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
As of February 2016, ND locks began shipping with a new latchbolt. The new latchbolt offers substantially improved performance in adverse door conditions (ex, with heavy door loading) andis more ro...
Prior to February 2016, using ND-Series locks on hollow metal doors required the use of latch spacers which prevent the latch from "fishtailing" (back end of latch moving from side to side). Latch ...
A and AL product: Must use the 2 3/8" backset with the 41-005 extension linkD Knob and ND product: Must use the 2 3/4" backset with the 43-005 extension link
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core
The ND lock can be installed on a 1 3/8" thick door by utilizing spacers, part number XN12-012.  These spacers are included with the lock when ordered for a 1 3/8" thick door.  The spacers can be o...