what schlage keyways match Ilco

RELATED FAQS

Question
Answer
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...
ILCO is a manufacturer that uses SC as a designation to represent Schlage keys.  ILCO is not affiliated with Schlage so a key with an SC designation was never manufactured by Schlage. The followin...
Split key systems are delivered in the highest level section on the key tip (insert): L - obverse or classic Y - reverse 0000 - Paracentric ZZZZ - Quad D000 - restricted Everest C000 - open...
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
Schlage changed to the Everest 29 default keyway on March 4th, 2013. At that time, Everest 29 S123 became the default keyway for all Schlage locks. Everest product is still available but must be sp...
Schlage Everest B keyways are restricted SFIC keyways.
The table below provides the Ilco cross reference to the Schlage keys.  Ilco Identification Section Pins Schlage Part # SC1 C 5 35-100 C SC4 C 6 3...
The FA3 keyway is the ILCO equivalent to a Falcon Conventional G 6-pin keyway.