User questions

Question
Answer
  • Why is the electric E996L-FSE trim used with a Chexit CX99 exit device?
  • Will the door unlock if a Von Duprin CX 98 / 99 Chexit device is deactivated with card reader and has a 996LBE trim?
  • How does the outside trim function on a Chexit Rim or Vertical Rod device?
  • Can the Chexit 98/99 be used with the E996 lever trim?
  • What is the part number for the Trim Device Cable to connect an E996 or RX996 or E7500 to a Chexit module?
  • What is the minimum opening that a Chexit 4' device can be cut down?
  • What are the amperage and power supply requirements for the Von Duprin Chexit (CX) devices?
  • Why does the fuse blow in the power supply when arming the Von Duprin Chexit device?
  • Is a fire alarm board required for a Chexit using the PS914?
  • How many Chexit devices can be operated from the PS914 power supply?
  • What gauge wire is needed for a CX device?
  • Why is my Von Duprin Chexit device not lighting up or arming?
  • Why does a Chexit device blink once then powers down?
  • Can protective plates be attached to fire rated door?
  • Where can I find AD/CO Series installation instructions?
  • What is the SUS feature "Device Template"
  • How do I cut a door to accept a Falcon W series lock?
  • Why can't I get my JD YA6 cylinder to install into an AD-Series lock?
  • Can the credential reader be changed on a CO-Series lockset?
  • Stile Size
  • What special template (ST) is used with the 4041EDA and a GJ 814-816?
  • How do you install a 4110 with flush transom frame?
  • Why won't the 5100 24v strike work on both a RH & LH door?
  • Is the ND lock available to accept Sargent, Corbin Russwin, Yale or Medeco cores or cylinders?
  • Can the AL locks be ordered to accept Corbin Russwin core?
  • How to order a T series lock with a Corbin Russwin full size interchangeable prep.
  • RU strike identification for early Corbin Russwin applications.
  • What is the part number for a Schlage cam to operate a Corbin lock?
  • What type of core will a lock with the cylinder suffix "J" accept?
  • What are the standard door and frame clearances?
  • What is the ANSI recommendation for the distance between the actuator and the door opening?
  • What is the AL Jupiter lever return to the door?
  • What is the minimum dimension from the edge of the door to a glass light cutout?
  • What is the size of the Levon lever in the A series?
  • What core options are available in L-Series door?
  • What are the thermal factors for Steelcraft door products?
  • What is the max rating available on an full glass (FG) door?
  • What are the different door cores available?
  • What cores are offered for insulated doors?
  • Is the L-Series mortise lock UL rated?
  • Are steel stiffeners required in all door constructions?
  • Is Rigid Cellular Polyisocyanurate Foam Core the same as Urethane Core?
  • Is there honeycomb core around the perimeter of doors that have either polystyrene or polyurethane insulation?
  • Do any products offered by Steelcraft contain asbestos?
  • How do I get service on my Astro Swing operator that isn't working properly?
  • Does LCN have a closer or operator for sliding doors?
  • How do you adjust a door closer?
  • What strike is used for a pair of doors with a Dor O Matic Rim device x Flushbolts on inactive door?
  • What electric strike can be used with the 1790?
  • Where can Von Duprin 6300 electric strike installation instructions or templates be found?
  • STRIKE TEMPLATE MACHINE SCREWS
  • Will the 6210 work with the Best 45H? If not is there another electric strike that is compatible.
  • What finishes should be used on exit devices near the ocean or in saltwater environments?
  • What is SRI?
  • Why are frames grouted?
  • Are LCN metal covers a ferrous or non ferrous Material?