These cylinders are designed with a microswitch attached to the back of the cylinder. The switch is operated by a cam when the key is rotated.
To order:
XB09-195
Mortise cylinder, on/off switch
Specify 20-001 per XB09-195
XB09-795
Same as XB09-195 but with double position
Specify 20-001 per XB09-795
XQ11-804
Same as XB09-195 but with Primus
Specify 20-700 per XQ11-804
The mortise cylinder switch is illustrated below:
Operation
With the XB09-195 the key is rotated and the switch is activated (momentary). The key can NOT be removed to leave the cylinder in the "ON" position.
With the XB09-795 the key can be rotated to the on or off position and then be removed.
The XB09-195, XB09-795, and XQ11-804 are basically modified mortise cylinders. The overall length of the mortise cylinder switch is approximately 1-9/16" (1.563"). The diameter of the cylinder face is approximately 1-3/8" (1.375"). The thread on the mortise cylinder switch is 1.150" x 32 UNS-2A.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.