ADA deadbolt location

RELATED FAQS

Question
Answer
The D100-Series and D200-Series have ADA compliant thumbturns. See the sell sheet stating ADA compliance.
The 248L-4 strike will not violate ADA.  If you change the 248L-4 to the 304L strike, then the latch would need to be lowered.
The Schlage B500-Series and B600/700/800-Series have ADA compliant turns.  See our deadbolt literature under downloads.
The 5 pound force requirement is in reference to the maximum force to swing the door, not the maximum force allowed to unlatch the exit device.  Maximum allowed force to retract the Von D...
8103EZ and 9103EZ have 2 1/2" clearance the other pulls have 1-1/2" clearance. Check with your local code for clearance required.
The 4040/4040XP closer mountings have the following maximum opening degree templating: The 4040/4040XP PA "Regular Arm" mount will allow for 180° max. opening. The 4040/4040...
The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...
Falcon does not offer an "ADA style thumbturn.
Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing design while s...