When placing an order for a 4041/4040XP Rw/PA with hold open, it would be ordered as a 4041 /4040XP Hw/PA. For an existing Rw/PA requiring the addition of a hold open function, a hold open arm woul...
The correct method (process) for setting the hold open is:
The 4010 hold open arms are handed, verify correct hand arm. (R or L stamped on main arm)
Loosen the hold open nut.
Opened the door ...
The hold open position on a "REG" or "EDA" hold open arm is set with the door to a few degrees shy of the desired hold open point. To properly set, open the door 5° less then the desired hold open...
No, LCN does not have an electronic hold open closer (SE/ME Series) that will provide a solid 180° hold open position.
The 3130SE has an adjustable hold open position from 85° to 110° maximum.
...
The 1460 Regular Arm part numbers are:
Regular Arm -- 1460-3077 or 1460-3077L for long arm (must specify finish).
Regular Arm with PA -- 1460-3077PA (must specify finish).
Regular Hold Open Ar...
The 4040 regular and hold open arms are different. You would have to get a different arm to convert from regular arm to a hold open function.
4040-3077 for a regular arm.
4040-3077L for a long ...