Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Al lock instal ”

RELATED FAQS

Question
Answer
Schlage AL small format spacer installation requirements.
The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores.  When these spacers are not ins...
Why can't I remove the control key from the core after the core is inserted into the lever?
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
Can you install a Schlage S lever on an AL lock?
You can not install the S lever onto an AL lock.  The AL and S lever trim is not compatible with each other.
New FSIC driver info for the AL locks.
The new AL FSIC driver part number is A700-052.  This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining ring.  Th...
Why can't a new spring cage or driver be installed on an older AL lock?
In 2002 the Schlage AL-Series underwent a design change that affected the spring cage, driver, and plastic insert.  Spring cage and driver replacements for AL locks manufactured before this design ...
AL-Series Plunger Assembly Instructions
Changing the plunger assembly on the AL-Series requires disassembling the chassis.  Refer to Plunger Assembly Instructions for guidance.
How do I identify an AL lock?
The AL-Series has four distinguishable parts that can help in lock identification.     1.   The AL-Series will have a castle nut holding the chassis on the ...
What height should a lock or deadbolt be installed?
According to ANSI specifications for cylindrical or mortise locks: The lock strike centerline should be 40 5/16" from the bottom of the frame with the lock in relation to the strike.&...