AL Locks Installation instructions


The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores.  When these spacers are not ins...
Changing the plunger assembly on the AL-Series requires disassembling the chassis.  Refer to Plunger Assembly Instructions for guidance.
Schlage offers the AL170 single dummy trim, but for applications where a double dummy is needed you can install two AL170 dummy trims back-to-back.  Each AL170 is shipped with a threaded rod (part ...
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
You can not install the S lever onto an AL lock.  The AL and S lever trim is not compatible with each other.
This information can be found at the following URL's: AD200/AD250/AD300/AD400 Cylindrical P516-092.pdf
AD200/AD250/AD300/AD400 Mortise P516-093.pdf
AD200/AD250/AD300/AD400 Cylindrical Exit P516-094.pdf
AD200/AD250/AD300/AD400 Mortise Exit P516-095.pdf
CO100/CO200/CO250 Cylindrical P516-266.pdf
CO100/CO200/CO250 Mortise P516-267.pdf
CO-Series Cylindrical Exit P516-268.pdf
CO-Series Mortise Exit P516-269.pdf