Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ AL series locksets ”

RELATED FAQS

Question
Answer
What backsets are available on Schlage and Falcon locks?
SCHLAGE locks are available with the following backsets: Lock Series Lock Type                 ...
Is there a tool to drill the thru bolt holes on cylindrical locks?
Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig.  When the jig changed to...
How does the AL170 get installed to make a double dummy?
Schlage offers the AL170 single dummy trim, but for applications where a double dummy is needed you can install two AL170 dummy trims back-to-back.  Each AL170 is shipped with a threaded rod (part ...
Will an AL lever fit onto an A-series lock?
The AL and A trim is not compatible with each other.
Are ND locks available in 629 or 630 finishes?
The AL and ND locks are not available in any stainless steel finishes.  The only option is either the 626 satin chrome or 625 bright chrome.
What is the warranty for Schlage commercial mechanical locks?
Warranty Statement3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below The provisions of these limited warranties do not apply to P...
What grade is the AL lock?
The AL lock is a Grade 2 lock ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.
New FSIC driver info for the AL locks.
The new AL FSIC driver part number is A700-052.  This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining ring.  Th...
What is the part number for an AL Series cylinder?
Refer to table 1 for the list of Schlage AL-Series cylinders.     AL-Series Cylinder Reference Table    Function  Cylinder Mechanism   Complete Cylinder   Non-Hotel Functions  ...