allegion customer service phone

RELATED FAQS

Question
Answer
You can contact Allegion Customer Service (Sales Support) or Technical Support (Product Support) by phone or by email. To contact by phone: ...
NOTE: You can also reach your local sales office by dialing 877-671-7011 and selecting option #3 from the main menu. You will be directed to your sales office based on the area cod...
To contact technical product support for Schlage Biometric Solutions products:Telephone:  877-671-7011, Option 2 (Product Support), Option 8 (Readers, Credentials, Biometrics)Email:  read...
Locknetics company supplied electro-magnetic locking devices, electronic smart locks, and electronic security components to access control dealers and lock smiths.  Ingersoll-Rand acquired ...
The programming processes for Allegion devices can be both product and features specific.  Some products programming processes are electronic in nature, others are physical in nature. &nbs...
Sitemaster support is handled by Matrix Security and all inquiries are directed to them.An FAQ for Sitemaster can be found hereTheir support line is 1-800-622-4893Videos and demo downloads ava...
Schlage Control™ mobile enabled smart locks  Schlage NDEB and LEB mobile enabled wireless locks  Schlage MTB mobile enabled multi-technology wall mount readers Schl...
To get a dry contact signal from a Chexit device to monitor the alarm, use the blue and brown wires (do not connect the blue to the red)  of the harness connector cable tha...
With the SUS connected to the AD400, in the EDIT tab there are radio communication settings "FIRST/DELAY/RETRY." FIRST - Is the first delay after the initial transmission of credential data, befor...
AD400 factory default settings when shipped are FIRST = 300 (m sec), DELAY = 200 (m sec) and RETRY = 5  
To change FIRST/DELAY/RETRY connect and couple the SUS/HHD to the AD400 and find under the EDIT tab the FIRST/DELAY/RETRY settings. See notes Or connect the SUS/HHD t...
Use a normally closed fire alarm as the input to the power supply option board (PS873-2 or PS914-2RS), this will hold the latch retracted.  During a fire alarm, the contact will open, dropping...