Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ anti-ligature door closer layout ”

RELATED FAQS

Question
Answer
Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.
Where are hardware templates?
All the templates can be found at us.allegion.comPlease click here
What special template (ST) is used with the 2030 closer and a low profile track and roller?
The 2030 closer requires a minimum 1-3/8" top rail on the door for the standard track.  For a top rail less than 1-3/8" and as narrow as 1", you could use the l...
What is the maximum degree of opening you can template a 4110 Cush closer?
The 4110 Cush closer can be templated for 85°, 90°, 100°, and 110° maximum as standard templates. The 4110 if ordered by ST-3220 will allow templating to 135°
What special template (ST) is used with a 4110 closer and GJ90 series?
ST-2730 is used with a 4110 closer and GJ90 series (up to size 4).  ST-2730 includes a special template and special arm with a -62G shoe and bent forearm. If a drop plate is required, a 4010-18 d...
What are Overhead Concealed door closer?
Overhead Concealed door closers are used to provide a more aesthetic look to the opening.  Concealed in either the frame or the door Offer the ability to be adjusted to maintain control o...
What special template (ST) is used with a 4040 Rw/PA mount closer and a GJ overhead stop?
ST Number Product 1 Product 2 Description ST-2776 ...
Can you order a 1461 cylinder only?
The part number is: 1461-3071 for the door closer cylinder body.
What is a 62A shoe used for?
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.