Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C" keyway:
Specify "CP6" as the cylinder suffix when ordering D100 or D200 locks (All other Schlage keyways are not available).
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
L583-446; Schlage Adams Rite MS modular cam used on 1 1/8", 1 3/8" and 1 5/8" cylinders
L583-447; Schlage Adams Rite MS modular cam used on 1 1/4", 1 1/2" and 1 3/4" cylinders
B502-944; Sch...
The Von Duprin 7500 mortise lock body ships in the NL mode. Either the function of 7500 lock body has not been changed to the Classroom function or the NL Drive screw is not all the way down. Step...
Tips for changing the function:
The NL Drive screw will not be visible when lock body is set to Classroom function
There is locktite on the screw that makes it seem like its turned down enou...
Only the Schlage ND-Series can be prepped to accept non-Schlage cores.
All designs are supplied with the appropriate tailpiece
Non-Schlage cores are NOT included
Lever designs available vary d...