Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ are hold open closers ADA compliant ”

RELATED FAQS

Question
Answer
Will a 4040SE open and hold at 180°?
No, LCN does not have an electronic hold open closer (SE/ME Series) that will provide a solid 180° hold open position. The 3130SE has an adjustable hold open position from 85° to 110° maximum. ...
How do I set the hold open on my 4040 closer?
The hold open position on a "REG" or "EDA"  hold open arm is set with the door to a few degrees shy of the desired hold open point. To properly set, open the door 5° less then the desired hold open...
What are Hold Open Closers & Magnets?
Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions.  Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...
Is the B500 and B600, B700, B800 thumbturn ADA compliant?
The Schlage B500-Series and B600/700/800-Series have ADA compliant turns.  See our deadbolt literature under downloads.
How do you order the L series lock with an ADA thumbturn?
Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing design while s...
Are the D100 and D200-Series thumbturns ADA compliant?
The D100-Series and D200-Series have ADA compliant thumbturns. See the sell sheet stating ADA compliance.