Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ best SFIC rim cylinder driver ”

RELATED FAQS

Question
Answer
What is the part number for the SFIC rim cylinder driver?
The Schlage SFIC rim cylinder driver is part number B520-365, shown below.     Figure 1: SFIC Rim Cylinder Housing
How long is the ND tailpiece for a thick door?
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock will need to ...
What are the part numbers for the SFIC driver and spacer used on the ND series locks?
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer
What is the part number for the SFIC driver on the AL locks?
The small format core throw member for the AL locks is C604-381.
Driver pins on SFIC mortise housings loosen up and fall out.
Issue:  Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.
New FSIC driver info for the AL locks.
The new AL FSIC driver part number is A700-052.  This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining ring.  Th...
What size driver is used to remove the torx screws on a modular cylinder?
The cam screw uses a T-10 and the housing screws use a T-15 driver.