Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Blade stop space ”

RELATED FAQS

Question
Answer
What is the part number for a blade stop shim for a 6111 or 6113 electric strike?
010055-xx is the part number for Blade Stop Shim kit for 6111 or 6113 electric strike and it must be ordered separately.  xx is for the finish callout.
What are the dimensions of an LCN-61 blade stop spacer?
The LCN -61 Blade Stop Spacer is powder coated steel and measures 4" x 1 1/8" x 1/2" (overall dimensions).
BLADE STOP SPACER
Shoe Spacer, Parallel Arm Closers, Aluminum Frame, Aluminum Store Front Frame
BLADE STOP
Aluminum Frame, Aluminum Store Front Frame, Aluminum Door and Frame
What other locks can the blue lever removal tool 24002693 be used with?
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
What does BSS and CSS stand for?
BSS means - Blade Stop Spacer.  A -61 for example would be used after the series of the closer being used. CSS means - Cush Shoe Support. A -30 for example would be used after the series of the cl...
What electric strike can be used with the 1790?
None of the Von Duprin electric strikes will work in a retrofit application where the normal standard mechanical strike is mounted to the frame because none of them are thin enough to fit in...
What is the difference between the Von Duprin 1439 strike and the 299 strike when using the 33A/35A rim device?
The Von Duprin 1439 strike is designed to be used on a blade stop frame and is 1/2" in height.  The 299 strike is normally used on the stop of a frame and is 13/16" in height.