Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ blast resistant doors ”

RELATED FAQS

Question
Answer
Do Steelcraft doors and frames meet Florida Building Code (FBC) requirements?
FBC Approvals: Yes, Steelcraft doors do meet the Florida Building Code (FBC) Protocols (TAS 201, TAS 202 & TAS 203) Missile impact & ASTM E-330 applications Dade County NOAs: Yes,...
Do Steelcraft PW-Series doors and FP-Series frames meet FEMA Tornado Resistant requirements?
Steelcraft Paladin PW-Series doors and FP-Series frames meet FEMA Tornado Resistant requirements and have been designed and tested to meet the requirements of FEMA 361 guidelines and ANSI ICC500....
Bullet Resistant Doors
At this time, Allegion does not supply products with bullet resistant ratings.   Bullet resistant (BR) doors are designed to protect people and property from firearms’ bullets and shrapnel. ...
What anchors are used in FEMA Tornado Resistant openings?
The following anchors are approve for use in FEMA Tornado Resistant openingsMasonry walls:Jamb anchors - Wire masonry anchorsSill (base) anchors - Adjustable base anchorsExisting walls:Jamb an...
Can L9000 locks be ordered for extended or thick doors?
The L9000 lock can be ordered for doors greater than 1 3/4" thick.  The allowable door thickness is dependent on the L lock function and how the lock is extended.  All locks for exte...
Can H-Series doors be used in tornado applications?
No. The Steelcraft H-Series hurricane door does not meet the FEMA 361 guidelines. The Paladin (PW14-Series) door does meet the FEMA 361 guidelines.
What door is used in a tornado application?
Tornado shelter applications require the use of Paladin PW14-Series doors and FP14-Series frames: Tornado shelter doors are a tested system comprising of the door, frame and hardware. ...
What are the maximum door width and height sizes?
Maximum nominal (overall) single door sizes are as follows: L-Series (Laminated Door) 20 Gage = 3’ 0” wide X  8’ 0” high 18 Gage = 4’ 0” wide X 10’ 0” high 16 Gage = 4’ 0” wide X 10...