break away lever

RELATED FAQS

Question
Answer
The demo version for HandNet for Windows stays active for 30 days after installation.  No activation is needed and the demo is a full functioning application.  Once the 30 days expires, H...
Replacing the battery on the 2670 should not cause the unit stop working. Make sure the spring that provides tension on the plastic finger is not bent out. The spring should be at a 90 degrees...
The Schlage SL1 ligature resistant lever is designed to break-away between 100 and 200 inch-pounds.  The lever will rotate at this point but not allow access.
The Schlage Vandlgard option available on select L-Series, LV-Series, and ND-Series and is ideal for areas subject to abuse or anywhere vandalism is likely to be present, such as schools, univ...
Vandlgard is specified by "LV" for mortise locks. The L9000 is a mortise style lock that mounts into a pocket mortised into the edge of the door.Vandlgard is specified by ND9x functions f...
- AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device.  Be sure this screw is installed- Exit hardware and strike must be properly mounted ...
The 7910-967 is a part number for a discontinued RF actuator. It was replaced by the 8310-3856WS RF actuator. The new 8310-3856WS requires the use of an 8310-865 RF receiver. When replacing the ol...
The RX switch is activated at approximately 18 degrees of lever rotation. 
The keycam may have failed, example here, the latest design keycam can be easily identified as the colored changed to black. Replace either the keycam or chassis as needed to r...
 This could also happen if the tailpiece isn't installed in a KIL, FSIC, or SFIC cylinder.  The FSIC driver also could have come loose from the core in the spindle.
The Schlage full size interchangeable core (FSIC) prepped B560F, B561F, and B563F deadbolts all require a UL fire cup (R) in order to be UL listed.  This fire cup is s...
Steelcraft does offer Thermal Break Frameson the FT series. Thermal break frames are available as:3-sided frames onlyFrames are available in 16 or 14 gauge steelFT series frames meet the requi...
Additional information on Thermal Break Frames can be found on Tech Data Pages 224 thru 227 
The 996L trim is the current standard trim with a break away feature built into the lever. The 994L was the original breakaway lever trim for the 98/99 series.  DISCONTINUED in mid ...
  Additional information: The 996L looks like the 992L The 996L replaced both the 994L and 992L The internal parts for the 994L and the 996L are exactly the same. The 992L prep was a li...
The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...
The spring in the hinge case or end case assembly lifts the crossbar and both lever arms.  If broken, the crossbar and lever arms will drop down. The weight of the crossbar and levers will automati...
The 4600 series operator will not be damaged when trying to open against a locked door. The 4600 series operator has an internal current sensing circuit that will shut down the operator when it see...
Yes, you can use a BACK Code list to control the type of punches that will be locked out until the timer has expired on any F-Series HandPunch that is break compliant.  By using 00 a...