Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ bronze finish comparison ”

RELATED FAQS

Question
Answer
What parts of the device and trim for the 98/99 are 643E finish?
Device: Pushbar end caps, pushbar trim and center case cover. Trim: Lever assembly, trim plate assembly (trim plate and bushing sleeve).Bronze Finish Comparison
What powder coat best matches US10B for a closer?
The closest powder coat finish by LCN is Dark Bronze (BHMA 695).
Is the old Doromatic 1090 the same as a 2090?
Yes, with the exceptions that the 2090 base material is aluminum whereas the 1090 was either brass or bronze base material depending on the finish.
What is the difference between 643e & 613?
The 643e is a powder coat finish equivalent to the US11 aged bronze finish.  The 613 is oxidized and oil rubbed and is equivalent to the US10B.
Close up of the copper relieved edges on 643e
Are the 643e and 716 finishes the same?
The commercial Aged Bronze finish (643e) is the BHMA equivalent to a copper plated, blackened, relieved and then clear coated product. This commercial finish is identical to the residential Aged ...
Why is the 613 finish is wearing off my lever?
Authentic oil rubbed bronze finish, or finish code 613 oil rubbed bronze will wear over time due to the “rubbed” finishing method which does not allow application of a protective coating or plati...
What finishes should be used on exit devices near the ocean or in saltwater environments?
Von Duprin Exit Devices (33A/35A, 98/99, etc) are handled on a case by case basis regarding their ability to handle salt and chemical environments. Our powder coated finishes US28 (Anodized Alum...