BULK PACK FOR COMPRESSION RING

RELATED FAQS

Question
Answer
Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077.  The...
Depending on the application, there are two types of blocking rings offered for mortise cylinders- One for use with a compression ring, and one for use without.  When a compression ring is u...
  After selecting the correct blocking ring, specify the thickness.  The table below shows the different thicknesses that the rings are offered in.      &...
For compression anchor details refer to the “ANCHORING SYSTEMS”  section in the Steelcraft Tech Data Manual.
DW-Series, K-Series, Anchor ; Tension Anchor
The part number for a Schlage mortise cylinder blocking ring for use without compression ring is the 36-079 (specify dimension and finish).
The 30-001 is a conventional mortise cylinder with a clover cam, compression ring and spring for use on rose trim. For use with the L9000 mortise locks except for the L9060 outside cylinder.
The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.