bump vs cush

RELATED FAQS

Question
Answer
The 4040/4040XP closer mountings have the following maximum opening degree templating: The 4040/4040XP PA "Regular Arm" mount will allow for 180° max. opening. The 4040/4040...
The dead stop post would need to be removed and the 4040/4040XP EDA mounting template for 180° would be followed.
The 1460 Regular Arm part numbers are: Regular Arm -- 1460-3077 or 1460-3077L for long arm (must specify finish). Regular Arm with PA -- 1460-3077PA (must specify finish). Regular Hold Open Ar...
Cam Lift hinges can only be used with LCN door closers that have a "Regular" style arm.     Manual Closers: Maximum lift dimension is 3/4". Can not be use EDA, CUSH, or Track Arm do...
When using the 4111 with a bar style coordinator MB-mounting brackets ordered from IVES are required. The brackets wrap around the coordinator to provide a surface for mounting the parallel arm ...
The part number for the 4041/4040XP HCush arm is 4040XP-3049CNS.
For LCN Cast Iron Closers it is (1 3/4") wide, (1 1/2") tall and (1 1/2") deepFor LCN Alum body Closers it is (2") wide, (1 1/2") tall and (1 1/2") deepSee HERE The center to center hole ...