Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can i replace cylinder collar ”

RELATED FAQS

Question
Answer
CYLINDER COLLAR
Blocking Ring
What cylinder is required for the 360L from Von Duprin?
A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar. Cylinder length does not chan...
What cylinder is required to for the Chexit device?
Chexit devices shipped after 8-24-2015 with motor driven: The Chexit device will use a 1 1/4" mortise cylinder with straight cam. Schlage cylinder 20-001-114 recommended. CAUTION: The length of t...
Chexit devices shipped prior to 8-24-2015:The CX device will need a 1 1/4" mortise cylinder with a straight cam per page 2 of the installation instructions. A 996L-M for a 1 3/4...
Does LCN still make a 4010SE / 4110 SE?
The LCN 4010SE / 4110 SE series are obsolete, and on longer available. They were replaced by the 4040SE series. The 4010SE / 4110 SE track is replaced with the current 4040SE trac...
What is the difference between a 4210 and a 4110?
The 4210 and 4110 use the same door closer cylinder body. The 4210 is the security version of the 4110.
Can I get parts for an old 4610/4620 auto operator?
The 4610/4620 series operators are obsolete. There is no replacement part for any electronic component (motor/clutch, controller, input/output PC boards) for the obsolete 4610/4620 operators.Essent...
Can the 4630/4640 cylinder only be replaced?
The 4040(XP) door closer can be used as a temporary replacement in a 4630/4640 operator to provide manual control of the door while the 4630/4640 closer cylinder is being repaired or a replacement ...