Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can medeco cylinder be used with l series schlage lockset ”

RELATED FAQS

Question
Answer
Will a Medeco key-in-lever cylinder fit into an ND lock?
Medeco does offer a key-in-lever cylinder to fit the Schlage ND.You will need to contact Medeco for the cylinderSpecify a key-in-lever cylinder to fit the Schlage ND lock.They will supply a cylinde...
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Typically for a 1-3/4" door you would use a 1-1/4" cylinder.  Use the Table in the Pricebook for a reference:  
What cam do Schlage mortise locks use?
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for ...
Available kits to convert classroom mortise locks to classroom security locks.
Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077.  The...
Can the AL locks be ordered to accept Corbin Russwin core?
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.
What are the wiring details for the Schlage L9000 mortise RX switch?
RX wiring on all L9000 locks with RX switch manufactured after January 2, 2017:The L-Series switched to a handed modular three-wire request to exit (RX) switch. This change was originally completed...
Specific to the RX switch installed into the L9080EL/EU and L9082EL/EU and L9000 mechanical locks prior to January 2, 2017:ALL PART NUMBERS BELOW DISCONTINUEDThe L-Series switched to a three-wire r...
What Schlage cam will operate Sargent locks?
Click here for a list of available Schlage cams comparable to the Sargent 13-0660.