Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Can you rehand L series mortise bodies ”

RELATED FAQS

Question
Answer
How do I change the handing on my 7500 mortise lock?
You can reference the 7500 mortise lock rehanding instructions. Remove the two screws from mortise lock faceplate. Remove the face plate and the collar from the mortise lock then rotate the la...
Is there a round corner armor front for the L series mortise lock?
The L series armor fronts are only available with square corners.  
What parts are needed to install an L lock on an 1 3/8" door?
The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped.  The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...
Is the L-Series mortise lock UL rated?
UL Listed for 3-hour fire door (except L9076 and L9077)
Can you order the Schlage L series mortise lock with knob on one side and lever on the other?
You can order an L lock with a lever on one side and knob on the other as long as it's still rose by rose, or escutcheon by escutcheon (must be same style escutcheon). EXCEPTIONS: Knob trim o...
Includes the SL1 lever on one side and the SK1 knob trim on the other side.
What are the part numbers for the inside and outside knobs for the L series?
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish
How long does it take to install a L Series mortise lock?
Typical installation by an experienced Schlage L lock installer on a door correctly prepped for the Schlage L-Series function could take 10 to 20 minutes.  Many outside variables can change the amo...
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Typically for a 1-3/4" door you would use a 1-1/4" cylinder.  Use the Table in the Pricebook for a reference: