change hand von duprin

RELATED FAQS

Question
Answer
Changing the handing on a Von Duprin 373L trim requires following parts: LHR to RHR requires 090092 ( Package of 4 springs ) and 050597 ( back plate assembly ). RHR to LHR requires  090091 ( Pa...
Changing the handing on a Von Duprin 373L trim requires following parts on all lever designs EXCEPT #12: RHR requires part number 090092-00 (LEVER CONTROL SPRING RHR PKG/4) and 050597-...
See attached instruction for re-handing the 996L/E996L trim.     Click Here: Trim Re-Handing   See page 2.
Changing the hands is not an option.  Recommendation is to replace the E376L trim with the correct handing.
The Von Duprin E996L electric trim is field reversible. See attached 996L installation instructions on page 2 for rehanding procedure.  996L Installation Instructions
At this time, the "handing" set screws for the Von Duprin 98/99 -2SI centercase are NOT available in the price list. 
The E996L is only shipped FS fail safe from the factory but can be converted to FSE fail secure.  To convert the 996L to E996L (fail safe or fail secure) follow step 1 of the attached installa...
The conversion kit does not contain a new mechanism case cover plate.  If a cover plate is desired you would need the Fire or Less Dogging Cover Plate for EL conversion kit and panic cover plate fo...
A E996 conversion kit is required to convert the 996L/L-BE trim to E996L/L-BE electric trim. 050672-00 is the electric conversion kit for 996L rim or vertical rod exit device. 050673-00 is the ...
Recommend to order a new 990NL-R/V or M trim to change from TP/Classroom function to NL/Storeroom function. You will also need to reinstall the NL drive screw back into into the mast...
Yes, the levers for the Von Duprin 996L lever trim can be changed in the field.  Page 2 of the instructions (921003) shows the "re-handing" sequence and this will apply to new levers if desire...
The Von Duprin 230L trim can be re-handed in the field by following the steps listed in the 230L/L-BE Instructions
You must have the Von Duprin NL Cylinder plate part number 967484-89 to convert the 370 series controls from classroom function to night latch function. If new installation, use the NL cylinde...
The Von Duprin 98/99EO exit devices will accept any of the exterior trims that we offer for 98/99 exit devices without any extra parts. 996L, 996L-NL, 996L-DT, 996L-BE, 990NL, 990DT, and 110NL a...
Followings are the steps to convert the Von Duprin 88TP to 88L device. Need to replace the back plate on the 88 exit device, part number 050103. Order a 373L trim and specify handing. Recomme...
We do not offer the 230L with night latch function. There is no conversion available.
Yes, the Von Duprin CD 98/99 device can be converted to HD (cylinder dogging to hex key dogging) in the field. 
A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar. Cylinder length does not chan...
The 880 series trim will work with the 44 series device.
Von duprin will supply the 996L and 996L-BE trims with RX switch. Von Duprin will not supply the 996L-NL and 996L-DT trims with RX switch because the switch monitors the lever movement and the leve...
The Von Duprin RX996L trim was released to standard order entry in May 2010. The Von Duprin 996L and 996L-BE trims can be ordered with RX switch. The 996L-NL and 996L-DT trims can not have the...
The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.
The 050672 is the part number for rim or vertical rod device and 050673 for the mortise device.
We ship the standard installation instructions because it contains enough information to show how to convert the trim from mechanical to electrical.
There is not a conversion kit to electrify the LP373L lever control.  You need to order a complete E-LP373L-BE control through Engineering Specials.
To convert the E360L electric trim from fail safe to fail secure or vice versa you need to replace the solenoid.  The 050743 is the fail secure and 050744 is the fail safe solenoid kit. ...
To change the 360L from TL (classroom) to NL (Night Latch) function invert the cam on the mortise cylinder. See attached instruction. 360L Instruction