Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ chexit installatio instructions ”

RELATED FAQS

Question
Answer
Where can I find wiring information for the Chexit?
Chexit devices shipped after 8-24-2015 with motor driven:Attached is the installation instructions of the the Von Duprin Chexit devices that includes the wiring diagrams.Installation Instructions&n...
Chexit devices shipped before 8-24-2015 with solenoid driven:Attached are the single and double door wiring , cable voltage reading documents for trouble shooting, and the installation in...
Can the Von Duprin Chexit device be changed to ALK exit alarm?
The Chexit device has a different base plate and center case than the ALK.  The Chexit device would need to be replaced with an ALK device.
What does BOCA mean for the Von Duprin Chexit option device?
The Von Duprin Chexit-BOCA has special software. Following is the function of this software: When Chexit device push bar is pushed and goes into alarm it will release in 15/30 sec...
Will a Von Duprin Chexit device automatically rearm itself after a fire alarm clears?
The Von Duprin Chexit device will not automatically rearm itself after a fire alarm clears.  After a Fire Alarm has triggered the Von Duprin Chexit device, the device must be manually reset&nb...
Will a key from pull side retract the Chexit device latchbolt when armed?
Using the key from the pull side of the door does not retract the latch bolt on a rim or vertical rod chexit device.
CX98/9975 mortise devices will retract the latch bolt when the key is used on the pull side of the door.
Why is the electric E996L-FSE trim used with a Chexit CX99 exit device?
The E996L-FSE trim is needed if the application requires fail-secure operation from the trim side of the opening. When power is out on Chexit device, E996L-FSE trim will remain locked to ...
Why does the auto operator not open the door when installed with a Chexit?
Chexit devices are NOT electric latch retraction.  In order for Chexit device to operate with an auto operator you will need to add a rim electric strike on a single door or a pair o...
How do I connect the external inhibit option for the Chexit?
For Chexit devices shipped after 8-24-2015 with motor driven connect your normally closed contact from access control system between green and red on the twelve field wire ...