Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ chexit trim vertical ”

RELATED FAQS

Question
Answer
How does the outside trim function on a Chexit Rim or Vertical Rod device?
A thumbpiece, knob or lever trim left in the unlock position would be locked when the Chexit is armed and unlock when the Chexit device is disarmed. To keep the outside trim in the lock p...
Will the door unlock if a Von Duprin CX 98 / 99 Chexit device is deactivated with card reader and has a 996LBE trim?
When CX99L-BE is not armed with key cylinder on the device or shunted by card reader, the exterior 996LBE lever trim will release.
Can the Chexit 98/99 be used with the E996 lever trim?
You can use the E996L electric trim with Chexit 98/99 series exit device.
What is the minimum opening that a Chexit 4' device can be cut down?
The Von Duprin CX 98/99-4 feet Rim devices on single doors with 5/8" stops and the standard 299 roller strike can be field sized to fit a minimum of 40.2" door opening.  This an...
Why is the electric E996L-FSE trim used with a Chexit CX99 exit device?
The E996L-FSE trim is needed if the application requires fail-secure operation from the trim side of the opening. When power is out on Chexit device, E996L-FSE trim will remain locked to ...
Can the NL key override be used on Chexit Rim or Vertical Rod devices?
The NL key override will not open the door while Chexit rim or vertical rod device is in the arm mode.
What is the part number for the Trim Device Cable to connect an E996 or RX996 or E7500 to a Chexit module?
The Trim/Device Cable part number is 040193.  If a Chexit device is ordered with an E996/RX996/E7500 from the factory, the trim/device cable is automatically furnished at no additional ch...