Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ closer conflict chart ”

RELATED FAQS

Question
Answer
What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?
The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm  with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm op...
Can a 4040 regular mount installed on the pull side and a Glynn Johnson 90 be mounted together?
The LCN 4041/4040XP and the Glynn Johnson 90 series can be mounted in conjunction with each other without a special template.  The 4040 door closer is on the pull side of the door and the GJ 90 is ...
Can I use a 4040 EDA and a Glynn Johnson 100 series concealed stop together?
There is not a conflict between the 4041/4040XP EDA door closer and the GJ 100 or 410 overhead concealed series stops.  The exception is:  the 4041/4040XP mounted on a drop plate, and the Glynn Jo...
Can a 4110 EDA and a Glynn Johnson 100 be used together?
A special template is not needed, the closer drops down far enough on the door where it does not conflict with the GJ100 series concealed overhead stop. 
Can a Glynn Johnson 90 stop be used with a top jamb mounted 4040?
A 4040-18G drop plate will be needed to drop the closer and arm down far enough not to conflict with the GJ 90 series overhead stop.
Will a Senior Swing work with swing clear hinges?
Push Side Surface Mount Senior Swing can be used with swing clear hinges, standard templating. Pull Side Surface Mount Senior Swing cannot be used, the pull arm will hit the back of door at approxi...