Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ closer for narrow door ”

RELATED FAQS

Question
Answer
What is the narrowest door a 4040 pull side will mount on?
14" door leaf is the narrowest with standard template.
What are Overhead Concealed door closer?
Overhead Concealed door closers are used to provide a more aesthetic look to the opening.  Concealed in either the frame or the door Offer the ability to be adjusted to maintain control o...
What is the narrowest door a 4010 can be mounted on?
When templated for 140° the 4010 will fit on a 16-1/2" door leaf MINIMUM.
Can you order a 1461 cylinder only?
The part number is: 1461-3071 for the door closer cylinder body.
What is a 62A shoe used for?
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.
What is SRI?
Special Rust Inhibitor (SRI) - is a pretreatment that is applied to the metal components prior to the addition of the LCN powder coat finish, standard or custom. ...
Can the 4630/4640 cylinder only be replaced?
The 4040(XP) door closer can be used as a temporary replacement in a 4630/4640 operator to provide manual control of the door while the 4630/4640 closer cylinder is being repaired or a replacement ...
What are the dimensions of the SC70 footprint
The measurements from center line to centerline of the mounting holes are 2-3/8"  x  6-3/4".
Can a 4010 be mounted with swing clear hinges?
Locate closer and arm from the centerline of the swing clear hinge pin.
What special template (ST) is used with the 2030 closer and a low profile track and roller?
The 2030 closer requires a minimum 1-3/8" top rail on the door for the standard track.  For a top rail less than 1-3/8" and as narrow as 1", you could use the l...