Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Closer minimum width ”

RELATED FAQS

Question
Answer
What is the narrowest door a 4010 can be mounted on?
When templated for 140° the 4010 will fit on a 16-1/2" door leaf MINIMUM.
What are Overhead Concealed door closer?
Overhead Concealed door closers are used to provide a more aesthetic look to the opening.  Concealed in either the frame or the door Offer the ability to be adjusted to maintain control o...
Can a 4110 closer be mounted on a 24 inch door?
Standard templating will allow a 4110 closer to be mounted on 24" wide door.
What is the mounting difference between a 2010 closer and a 2030 closer?
The 2010 and 2030 closer are not the same. The 2010 Series closer uses the (larger) 4010 cylinder which requires a 4" minimum frame tube to mount in. The 2030 uses the (narrow) "Pacer" cylinder...
What special template (ST) is used with the 2030 closer and a low profile track and roller?
The 2030 closer requires a minimum 1-3/8" top rail on the door for the standard track.  For a top rail less than 1-3/8" and as narrow as 1", you could use the l...
Do you need Double Egress arm to install a 4040SE on the Push Side of a door?
The 4040SE uses the regular arm for any Push Side mounting (minimum 28" door width). ST-2788 (a special arm and track) can be used to mount a 4040SE on the Push Side of a smaller (narrow) door. Sm...
What is the minimum top rail needed for the 4111 EDA/HEDA?
The minimum top rail required to mount a 4110 closer is 5-1/8" measured from the stop of the frame. If the top rail is less than 5-1/8" the 4110-18 drop plate is required.
How do you adjust a door closer?
How to:  What are the steps to adjust a door closer?Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment.  All closers with a "Delay" feature ...