Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ CLOSER ON FIRE DOOR ”

RELATED FAQS

Question
Answer
What are Hold Open Closers & Magnets?
Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions.  Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...
Is the 3130 Series closer Fire Rated?
The 3130 Series closer is UL listed- Fire Rated (UL-10C) for up to 3 Hr.The Door and Frame Manufacturer needs to be contacted to verify their Door/Frame rating would not be compromised wh...
Are the Falcon SC Series door closers fire rated?
615R is not a door closer model number. It is a UL number for the Falcon SC Series closers.
Yes, the Falcon SC Series closers have a UL listing.
Are LCN Closers Fire Rated?
All LCN closers have UL listings, and are Fire Rated for up to 3 hours.
What would cause an ME Series closer (2310ME/4310ME/4410ME) to pop back into hold open as it is closing?
This condition can be caused by the "closing speed adjustment" being regulated for a fast closing speed. Try adjusting the closing speed to slow down the closing of the door. If that does not corre...
Can a Cam Lift hinge be used with LCN closers?
Cam Lift hinges can only be used with LCN door closers that have a "Regular" style arm.     Manual Closers: Maximum lift dimension is 3/4". Can not be use EDA, CUSH, or Track Arm do...
Can you order a 1461 cylinder only?
The part number is: 1461-3071 for the door closer cylinder body.
What is a 62A shoe used for?
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.
What is SRI?
Special Rust Inhibitor (SRI) - is a pretreatment that is applied to the metal components prior to the addition of the LCN powder coat finish, standard or custom. ...