Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ closer template for swing clear hinges ”

RELATED FAQS

Question
Answer
Where are hardware templates?
All the templates can be found at us.allegion.comPlease click here
Can a 4040 Pull Side closer be mounted with Swing Clear Hinges?
ST-1583 is used to template a 4040 or 4040XP closer mounted hinge side with swing clear hinges.     
ST1583
Does a SEH require a door closer?
The SEH is an "electronic holder" (ONLY) that is used to hold open a Fire Rated opening. It requires a door closer to be mounted on the opposite side. It is normally used on an existing opening wit...
What is the template for 5BB1HW for Swing Clear Hinges?
See attached templates.  5BB1HW Swing Clear Hinges
Can a 4010 be mounted with swing clear hinges?
Locate closer and arm from the centerline of the swing clear hinge pin.
What is the maximum degree of opening you can template a 4110 Cush closer?
The 4110 Cush closer can be templated for 85°, 90°, 100°, and 110° maximum as standard templates. The 4110 if ordered by ST-3220 will allow templating to 135°
What is the difference between the FE and DE-Series frames
A Double Egress frame is a double door frame prepared to receive two single-acting doors swinging in opposite directions (both doors are) the same hand. These openings are installed in cross corrid...
What hinges can an EPT be installed with?
EPT can be used on following hinges: Degree of the opening Hinge type Door thickness 0-180 degree Up to 5" butt hinges 1 3/4" 0-180 degree Up to 3/4" offset pivots 1 3/4" 0-130 degree 5 1/2"...
See related solution: Can an EPT be used with Cam Lift Hinges?
Can you use a 4040SE with swing clear hinges on the pull side?
Pull Side Mount: The 4040SEL X ST-2966 is required for pull side mounting with swing clear hinges. ST-2966 template
Push Side Mount: Take the dimensions for the closer and track from centerline of swing clear hinge pin for the push side mount.