Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ CLOSER WITH OVER HEAD STOP MOUNTING ”

RELATED FAQS

Question
Answer
What special template (ST) is used with a 2030 closer and GJ over head stop?
Special template ST-2211 is used to mount a 2030 series closer with a GJ 70,79,81,90, and 450 series overhead stops. This ST works with any GJ "surface" mounted stop. The 2030 closer cannot b...
Can a Glynn Johnson 90 stop be used with a top jamb mounted 4040?
A 4040-18G drop plate will be needed to drop the closer and arm down far enough not to conflict with the GJ 90 series overhead stop.
What special template (ST) is used with a 4110 closer and GJ90 series?
ST-2730 is used with a 4110 closer and GJ90 series (up to size 4).  ST-2730 includes a special template and special arm with a -62G shoe and bent forearm. If a drop plate is required, a 4010-18 d...
Can I mount an LCN Cush closer with an GJ overhead stop?
It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.
Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.
What is a 62A shoe used for?
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.
What length SRT screw is used for mounting the body of a 1461 closer?
The SRT screw that is used for mounting the 1461 closer body is 1 3/8" long.Four screws are used to mount the closer body.
What special template (ST) is used with a 4040 Rw/PA mount closer and a GJ overhead stop?
ST Number Product 1 Product 2 Description ST-2776 ...
What options are available to add frame reinforcement for surface closer?
Steelcraft offers two optional types of reinforcements for open section header to be installed in distributor shop or in the field: Full profile sleeve; is a 14 gauge, 16" long part to fit the p...
Does the old style 4030 have the same templating as the new style 4031?
The old 4030 series was: Handed Mounted regular arm hinge side. Had sized springs, were not adjustable. The 4033 is an obsolete closer.  If required, handing can be verified by looking at ...