Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ closers for heavy doors ”

RELATED FAQS

Question
Answer
What is the maximum door weight recommended for LCN closers?
The maximum recommended door weight for LCN closers is 225 lbs.
What is a 320G door closer?
The "320G" is the # on a UL sticker attached to the arm of most LCN door closers, and is not a door closer model number.  The "320G" means that the arm is not a mechanical hold open device and OK t...
Where are hardware templates?
All the templates can be found at us.allegion.com   Please click here
What is a 62A shoe used for?
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.
Can you order a 1461 cylinder only?
The part number is: 1461-3071 for the door closer cylinder body.
What are the dimensions of the SC70 footprint
The measurements from center line to centerline of the mounting holes are 2-3/8"  x  6-3/4".
Can a 4010 be mounted with swing clear hinges?
Locate closer and arm from the centerline of the swing clear hinge pin.
Can you manually pull a 4040SE out of hold open?
The holding force on an SE/ME Series door closer is approximately 35 lbs. and they can be manually pulled out of hold open with approximately 35 lbs of force. 
In what direction should the hold open nut be pointing for a 4041 H closer, up or down?
Make sure that the hold open nut is not on upside down.  The orientation of the hold open nut depends on the mounting. On a Top Jamb "Push Side" mount, the hold open nut would poi...