Special template ST-2211 is used to mount a 2030 series closer with a GJ 70,79,81,90, and 450 series overhead stops. This ST works with any GJ "surface" mounted stop.
The 2030 closer cannot b...
ST-2730 is used with a 4110 closer and GJ90 series (up to size 4). ST-2730 includes a special template and special arm with a -62G shoe and bent forearm.
If a drop plate is required, a 4010-18 d...
A special template is not needed, the closer drops down far enough on the door where it does not conflict with the GJ100 series concealed overhead stop.
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.
There is not a conflict between the 4041/4040XP EDA door closer and the GJ 100 or 410 overhead concealed series stops.
The exception is: the 4041/4040XP mounted on a drop plate, and the Glynn Jo...
The valve on the back of a 4041/4040XP closer is a "Back Check Selector Valve" that needs to be turned in on "Parallel Arm" mount applications ONLY. If a 4041/4040XP closer mounted "Top Jamb", or "...
Push Side Surface Mount Senior Swing can be used with swing clear hinges, standard templating. Pull Side Surface Mount Senior Swing cannot be used, the pull arm will hit the back of door at approxi...
Overhead Concealed door closers are used to provide a more aesthetic look to the opening.
Concealed in either the frame or the door
Offer the ability to be adjusted to maintain control o...
The 4040 Rw/PA can be mounted 3 different ways.
The 4040-18 drop plate is used for the regular pull side mount.
The 4040-18TJ drop plate is used for the top jamb push side mount.
The 4040-18P...
The LCN 4041/4040XP and the Glynn Johnson 90 series can be mounted in conjunction with each other without a special template. The 4040 door closer is on the pull side of the door and the GJ 90 is ...
Because of the new extended LCN warranties and the desire to be consistent across the entire Allegion premium brands, LCN will be moving away from offering an out-of-warranty repair service beginni...
How to: What are the steps to adjust a door closer?Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment. All closers with a "Delay" feature ...
Using Soss hinges with closers can require special device and preparation locations. If you have questions on specific closer applications, please e-mail your request (including a description ...