CONSTRUCTION CORE D KEYWAY

RELATED FAQS

Question
Answer
This only applies to the full size interchangeable cores.  The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed).  Simply add (-ICX) to the end o...
Use the cylinder suffix 'T' for full size interchangeable core or the cylinder suffix 'HD' for small format interchangeable core, see Figure 1.  Small format also has a disposable core option ...
A lock specified by a cylinder suffix BDC will be supplied with a disposable small format construction core, see Figure 1 below.  There is no metal key but instead the BDC cylinder has a ...
A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.
Construction Core Program Policy: Full size and small format construction cores will be invoiced under standard payment terms. Credit for these cores, less the handling charge, will be issued upo...
Any SFIC core will operate in the C987.  Specifically, the Schlage temporary cores are the 80-035 GRN and 80-035 BRN.
Yes, 4" butt hinge preparations are available as an option on hollow metal doors and frames as noted below: Hinge type: square corner with commercial hole pattern. Preparations for radius c...
These references are from an old and outdated SDI 100 specification. The new specification SDI 100 ANSI A-250.8 does not contain letter designations for core material. Core constructions designat...
Thermal Bow is a temporary condition which occurs in metal doors mainly due to the temperature differential from one side of the door to the other. This may occur in exterior doors when direct sun ...
No, steel stiffeners are not required in Hollow Metal doors, they are one of many optional core available. Per ANSI/SDI A250.8 and ANSI/HMMA 867, core construction are optional o...
Insulated Core Options: Steelcraft L-Series doors are available with the following 2 optional insulated cores: Polystyrene slab - this core is available in non fire rated and fire rated doors...
The part number is 48-102 C, you will need to specify the cuts.
The profile or shape of the key is different.  This would apply to all key sections with differing names such as F, CE, etc.
Regular Core (suffix keyway to number) Description Uncombinated Combinated 6-Pin 7-Pin 6-Pin 7-Pin Standard C646 C647 C606 C607 Best style capping CB846 CB847 CB...
Part number 80-037 is the combinated Schlage Everest small format interchangeable core and is available in the restricted Everest B Family keyways. Part number 80-036 is an uncombinated version.
The 914KIL-IC trim is shipped with a Small format interchangeable core (SFIC) in a 6 pin "A" section/keyway.  A comparable core from Falcon would be the C646 (uncombinated - no pins) or C...
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key fami...
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core