Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ custom finish for locks ”

RELATED FAQS

Question
Answer
What finishes are the L locks available in?
The finishes below are available on the L9000, some lever designs and trims are not available in all finishes.  605  Bright Brass  606  Satin Brass  609 &...
How do I clean my L lock finish?
Cleaning and caring for the lock will vary depending on the finish. Clear-coated or oil rubbed finishes can be cleaned periodically with a mild non-abrasive soap and buffed lightly with a clean ...
Is the Schlage Latitude and Longitude lever available in a stainless steel finish?
Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes.
What grade of stainless steel do we use in the levers on L9000 locks?
Schlage offers 629 and 630 stainless finishes on levers for the L-Series only.  These levers are made of 303 or 304 grade stainless steel.
How to install an L9000 mortise lock less outside rose trim?
The L283-150 is a modified mounting plate to allow a user to only install trim on the inside of the L9000.  For installation and door prep requirements, see the install sheet.  Add...
Can you order the Schlage L series mortise lock with knob on one side and lever on the other?
You can order an L lock with a lever on one side and knob on the other as long as it's still rose by rose, or escutcheon by escutcheon (must be same style escutcheon). EXCEPTIONS: Knob trim on the...
Includes the SL1 lever on one side and the SK1 knob trim on the other side.
What is the part number for the armor mounting screws for the L lock?
The part number is K110-020 (includes 2 screws).  You will also need to specify the finish.
What is the warranty for Schlage commercial mechanical locks?
Warranty Statement3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below The provisions of these limited warranties do not apply to P...
What are the part numbers for the inside and outside knobs for the L series?
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish