Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ cutting von duprin devices ”

RELATED FAQS

Question
Answer
Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?
You need to order the EL98/9947 or 3'  EL conversion kit.  This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.
Can the existing 9927/9947/9948 devices be cut to fit a 24" leaf?
No, the existing 98/9927/F, 98/9947/F and 98/9947/F devices can't be cut to fit a 24" leaf door.
What is exposed glass size?
When dealing with glass lights in doors, there are three (3) critical dimensions which must be coordinated: Exposed Glass Size (EGS) - the horizontal and/or vertical dimensional size of the vision...
How is glass cutting size figured for standard or special glass light installed?
The GCS (Glass Cutting Size) is determined by adding 1 1/4" to EGS (Exposed Glass Size) to both the height and width dimensions. Ex: EGS = 20" w. x 30" h. GCS = 21 1/4" wide x 31 1/4" high St...
Can you use a Von Duprin 94/95 Inpact device on a wood door?
The Von Duprin 94/95 series Inpact devices can only be installed on metal doors as there would not be enough material left in the wood door after cutting out the 94/95 device prep to maintain door ...
What is the minimum opening that a Chexit 4' device can be cut down?
The Von Duprin CX 98/99-4 feet Rim devices on single doors with 5/8" stops and the standard 299 roller strike can be field sized to fit a minimum of 40.2" door opening.  This an...